Preparation of Medical Equipment and Instruments
Until recently, the most advanced sterilisation technology was found only in large hospital sterilisers. There is now a growing demand for more sophisticated sterilisation technologies in a variety of professions. By following a few simple steps, you can have clean, sterilised instruments that can be used in any medical situation. In this article, we are going to list for you how to prepare medical instruments for autoclave. Cleaning with precision is necessary for medical equipment but you have to follow the right steps before they can get to a place where they are cleaned en masse. You can find that solvents can be used from larger companies like envirotech-europe.com for critical cleaning, but if you need a step by step guide to get you to the point of sterilisation, you’re in the right place!
- Sort the instruments. Inspect every instrument as you sort to make sure it’s clean. Arrange the instruments based on what they’re used for and where they need to end up. Keeping them organised is essential because each instrument has a purpose. Make sure you know what your instruments are going to be used for next before you sort them.
- Organise and wrap the instruments for distribution before the autoclaving process. If you wait until afterwards and open them, they won’t be sterile. Place instruments in pouches. Once you have your instruments sorted, you need to place them in sterilized pouches that can go into the autoclave. You should use special autoclave pouches designed to withstand the high temperatures of the autoclaves. The pouches have a strip of test tape that changes colour when the autoclave process is effective. Take each pile of instruments you sorted and place them in as many bags as necessary.
- You shouldn’t have too many in a bag because it might hinder the sterilization process. Make sure that any instrument that can open, such as scissors, is left open when you put it into a pouch. The inside of the instruments need to be sterilized as well
- Autoclaving in pouches is convenient because you can see the instruments you need when finished
- Label the pouches. Once you have them locked in a pouch, you need to label each one so you and others will know what the instruments are needed for. Write the instrument names, the date, and your initials on the pouches. Seal each bag securely. If the bag doesn’t already have a test strip, attach one. This will show whether the sterilisation was successful. You can now place the pouches in the autoclave.
Now you know how to autoclave your equipment, you can be ready for sterilisation. Medical instruments need to be meticulously counted and looked after, which will enable you to be able to track the equipment you use. Operations cannot be performed with subpar equipment anymore – while that may have been okay when surgery was born, it’s definitely not okay now!